- 追加された行はこの色です。
- 削除された行はこの色です。
#author("2020-04-03T17:34:48+09:00","default:kouzouken","kouzouken")
#author("2020-04-08T11:19:02+09:00","default:kouzouken","kouzouken")
#contents
*佐々木先生のとこのエラー [#jf1a592e]
最初は解けていた梁の簡単な問題でも出力が出せなくなった。
起動はできて、runすると
Cannot read output file or empty file
のエラー。output fileが出力されない。
Salome-Meca2019の場合、実行中のHistory Viewの右下に出ている
Outputタブ(ここに Cannot read output file or empty file. が表示されている)を
Messagesタブに切り替えると、計算が終了していたり(ここで終了してなくても、
Outputに戻ると)終了したりする。
というわけで、実行後は、OutputとMessagesのタブを時々 切り替えるといいような。
**起動時のエラー [#s8e49b52]
INFO:MainThread:/home/kouzou/salome_meca/appli_V2019.0.3_universal/bin/salome/PortManager.py[151]Problem
loading PortManager file: /tmp/.salome_PortManager.cfg
INFO:PortManager:Problem loading PortManager file:
/tmp/.salome_PortManager.cfg
Searching for a free port for naming service: 2810 - OK
Searching Naming Service + found in 0.1 seconds
Searching /Kernel/Session in Naming Service ++Error in sitecustomize; set
PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
++++++++++++++_IceTransSocketUNIXConnect: Cannot connect to non-local host
localhost
_IceTransSocketUNIXConnect: Cannot connect to non-local host localhost
+Error in sitecustomize; set PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
+Warning: this type (Study,objref) already exists, it will be ignored.
Warning: this type
(SALOME_MED/MEDCouplingFieldDoubleCorbaInterface,objref) already exists,
it will be ignored.
found in 9.0 seconds
Start SALOME, elapsed time : 9.5 seconds
Error in sitecustomize; set PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
****************************************************************
Warning: module NETGENPLUGIN is improperly configured!
Module NETGENPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module HYBRIDPLUGIN is improperly configured!
Module HYBRIDPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module HexoticPLUGIN is improperly configured!
Module HexoticPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module GHS3DPLUGIN is improperly configured!
Module GHS3DPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module BLSURFPLUGIN is improperly configured!
Module BLSURFPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module GMSHPLUGIN is improperly configured!
Module GMSHPLUGIN will not be available in GUI mode!
**************************
**error.log [#h23a92ae]
Error in sitecustomize; set PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
Error in sitecustomize; set PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
Error in sitecustomize; set PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
**output.log [#ubeb4984]
ERROR: The user login on remote machine MUST be given.
**動作中のエラー [#t90eaa94]
runSalome running on agr194-186.hines.hoge.ac.jp
INFO:MainThread:/home/kouzou/salome_meca/appli_V2019.0.3_universal/bin/salome/PortManager.py[151]Problem
loading PortManager file: /tmp/.salome_PortManager.cfg
INFO:PortManager:Problem loading PortManager file:
/tmp/.salome_PortManager.cfg
Searching for a free port for naming service: 2810 - OK
Searching Naming Service + found in 0.1 seconds
Searching /Kernel/Session in Naming Service ++Error in sitecustomize; set
PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
+++++++++++++++++Error in sitecustomize; set PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
Warning: this type (Study,objref) already exists, it will be ignored.
Warning: this type
(SALOME_MED/MEDCouplingFieldDoubleCorbaInterface,objref) already exists,
it will be ignored.
+ found in 10.0 seconds
Start SALOME, elapsed time : 10.6 seconds
Error in sitecustomize; set PYTHONVERBOSE for traceback:
AttributeError: module 'sys' has no attribute 'setdefaultencoding'
****************************************************************
Warning: module NETGENPLUGIN is improperly configured!
Module NETGENPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module HYBRIDPLUGIN is improperly configured!
Module HYBRIDPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module HexoticPLUGIN is improperly configured!
Module HexoticPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module GHS3DPLUGIN is improperly configured!
Module GHS3DPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module BLSURFPLUGIN is improperly configured!
Module BLSURFPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
Warning: module GMSHPLUGIN is improperly configured!
Module GMSHPLUGIN will not be available in GUI mode!
****************************************************************
SalomeApp_Engine_i::Load() isMultiFile = 0
AsterStudy: 金-03-16:46:50.614 Opening AsterStudy JSON file...
AsterStudy: 金-03-16:46:50.620 Use version 'stable' (14.4.0)
AsterStudy: 金-03-16:46:50.620 loading case 'RunCase_1' (1/2)...
AsterStudy: 金-03-16:46:50.620 loading stages...
AsterStudy: 金-03-16:46:50.620 case 'RunCase_1' loaded
AsterStudy: 金-03-16:46:50.621 loading case 'CurrentCase' (2/2)...
AsterStudy: 金-03-16:46:50.621 loading stages...
AsterStudy: 金-03-16:46:50.767 case 'CurrentCase' loaded
AsterStudy: 金-03-16:46:51.141 JSON file reloaded
AsterStudy: 金-03-16:46:52.114 AsterStudy is activating...
AsterStudy: 金-03-16:46:52.115 Creating workspace...
AsterStudy: 金-03-16:46:52.221 Refreshing configuration on localhost...
AsterStudy: 金-03-16:46:53.654 workspace is ready.
AsterStudy: 金-03-16:46:54.410 AsterStudy activated
AsterStudy: 金-03-16:47:22.208 saving case 1-RunCase_1...
AsterStudy: 金-03-16:47:22.211 saving case 15-RunCase_2...
AsterStudy: 金-03-16:47:22.213 saving case 5-CurrentCase...
AsterStudy: 金-03-16:47:23.064 Submitting job on localhost...
AsterStudy: 金-03-16:47:23.129 job submitted
AsterStudy: 金-03-16:47:23.134 Getting job output on agr194-186...
AsterStudy: 金-03-16:47:23.274 exit code: 255
AsterStudy: 金-03-16:47:23.352 Getting job output on agr194-186...
AsterStudy: 金-03-16:47:23.367 exit code: 255
AsterStudy: 金-03-16:47:23.372 Getting job output on agr194-186...
AsterStudy: 金-03-16:47:23.387 exit code: 255
AsterStudy: 金-03-16:47:23.391 Getting job output on agr194-186...
AsterStudy: 金-03-16:47:23.406 exit code: 255
/bin/cp: '/tmp/asterstudy_workdir_kouzou/kouzou-agr194-186.hines.hoge.ac.
jp-金-03-164723.050/./bou2.med' を stat できません: そのようなファイルやディ
レクトリはありません
/bin/cp: '/tmp/asterstudy_workdir_kouzou/kouzou-agr194-186.hines.hoge.ac.
jp-金-03-164723.050/./message' を stat できません: そのようなファイルやディ
レクトリはありません
/bin/cp: '/tmp/asterstudy_workdir_kouzou/kouzou-agr194-186.hines.hoge.ac.
jp-金-03-164723.050/./base-stage1' を stat できません: そのようなファイルや
ディレクトリはありません