Department of Earth Science and Technology

T-1-1	Negishi, Y., Maruyama, T. and Yamamoto, M. (2002) : Eruptive System of the Irohazaka Welded Tuffs and Correlation to the Late Cretaceous Igneous Activity of the Inner Zone of Southwest Japan, Earth Science (Chikyu Kagaku), Vol. 56, p. 269-88 (in Japanese with English Abstract).
T-1-2	Yagi, M., Shiraishi, T., Kano, H., Ishikawa, Y., Chiba, M., Kadowaki, H., Sawata, S., Iizuka, F., Ota, K., Ito, C., Sasaki, Y., Miura, S., and Ishikawa, K. (2002) : Explanatory Text of Fundamental Land Classification Survey (Geomorphology, Subsurface Geology and Soil), �gIwadate-Nakahama�h (Scale 1:50000), Akita Prefecture, 60 p. (in Japanese).
T-1-3	Takahashi, M., Mizuta, T., Ishiyama, D., Kimura, J. and Takada, J. (2002) : Characteristics of Trace Elements in Quartz by LA-ICP-MS and the Origin of Ore Fluid Associated with Gold Mineralization at the Hishikari Epithermal Gold Deposit, Japan, Resource Geology, Vol. 52, p. 51-67.
T-1-4	Ogata, T., Mizuta, T., Ishiyama, D., and Takada, J. (2002) : Instrumental Neutron Activation Analysis of Tungsten Content in Mineralized and Non-mineralized Granite, Journal of the Society of Materials Engineering for Resources of Japan, Vol. 15, p. 11-8.
T-1-5	Sato, T., Saito, T., Yuguchi, S., Nakagawa, H., Kameo, K., and Takayama, T. (2002) : Late Pliocene Calcareous Nannofossil Paleobiogeography of the Pacific Ocean: Evidence for Glaciation at 2.75Ma, Revista Mexicana de Ciencias Geologicas, Vol. 19, No. 3, p. 175-89.
T-1-6	Nagahashi, Y., Kataoka, K., Yoshikawa, S., and Sato, T. (2002) : Correlation of the Km3 Tephra Layer from the Kitaura Formation, Oga Peninsula, Akita Prefecture, Japan, with the Om-SK110 Tephra, Journal of the Geological Society of Japan, Vol. 118, No. 11, p. 761-4 (in Japanese with English Abstract).
T-1-7	Ogata, T., Ishiyama, D., Mizuta, T. and Nakashima, K. (2002) : Coexistence of a Fluid Phase with Granitic Magma: Geochemical Characteristics of REEs and Cu in Miyako Granite and in Scheelite-bearing Aplitic Veins at the Yamaguchi Cu-W Skarn Deposit, Iwate, Japan, Resource Geology, Vol. 52, p. 173-86.
T-1-8	Yoshikawa, M., Sudo, Y., Tsutsui, T. and Taguchi, S. (2002) : Vp/Vs Ratio and Seismic Activity at Geothermal Fields in the North-Western Area of Kuju Volcano, Kyushu, Japan, Journal of Geothermal Research Society Japan, Vol. 24, p. 1-12 (in Japanese with English Abstract).
T-1-9	Tanaka, S., Hamaguchi, H., Nishimura, T., Yamawaki, T., Ueki, S., Nakamichi, H., Tsutsui, T., Miyamachi, H., Matsuwo, N., Oikawa, J., Ohminato, T., Miyaoka, K., Onizawa, S., Mori, T., Aizawa, K. (2002) : Three-dimensional P-wave Velocity Structure of Iwate Volcano, Japan from Active Seismic Survey, Geophysical Research Letters, Vol. 29, No. 10, DOI:10.1029/2002GL014983.
T-1-10	Onizawa, S., Oshima, H., Aoyama, H., Mori, H., Maekawa, T., Suzuki, A., Tsutsui, T., Matsuwo, N., Oikawa, J., Ohminato, T., Yamamoto, K., Mori, T., Taira, T., Miyamachi, H., Okada, H. (2002) : USU2001; 3D P Velocity Structure, Gekkan Chikyu, Special Issue, No. 39, p.     (in Japanese).
T-1-11	Research Group for Deep Structure of Nagamachi-Rifu Fault (2002) : Seismic Reflection Survey in Nagamachi-Rifu Fault, Sendai, Northeastern Japan, Tohoku Geophysical Journal, Vol. 36, p. 311-56.
T-1-12	Sakanaka, S. (2002) : An Automatic Analysis of the Curve Matching Method for Electric Sounding Under Layered Strata, Scientific and Technical Reports of Faculty of Engineering and Resource Science, Akita University, No. 23, p. 1-11 (in Japanese with English Abstract).
T-1-13	Hashimoto, T., Utsugi, M., Sakanaka, S. and Tanaka, Y. (2002) : Heat Discharging Process and Geomagnetic Change of Iwoyama, Kuju Volcano, Annuals of the Disaster Prevention Research Institute, Kyoto University, No. 45B, p. 617-625 (in Japanese with English Abstract).
T-1-14	Nakaboh, M., Ono, H., Sako, M., Hashimoto, T., Sudo, Y., Ohkura, T., Yoshikawa, S., Utsugi, M., Sakanaka, S. and Hurst, A. W. (2002) : Ground Deformation at Kuju Volcano, Annuals of the Disaster Prevention Research Institute, Kyoto University, No. 45B, p. 633-643 (in Japanese with English Abstract).
T-2-1	Sasaki, K., Akibayashi, S., Yazawa, N. and Kaneko, F. (2002) : Microscopic Visualization with High Resolution Optical-Fiber Scope at Steam Chamber Interface on Initial Stage of SAGD Process, Proc. of the SPE/DOE Thirteenth Symposium on Improved Oil Recovery (IOR2002)(Tulsa, USA), SPE75241, p. 1-8.
T-2-2	Sasaki, K., Akibayashi, S., Itoh, Y. and Gonda, T. (2002) : Experiments on CO2 Water Solubility and Hydrate Formation in Flow through Porous Medium, Proc. of The Fourth International Conference on Gas Hydrates (ICGH-4) (Yokohama, Japan), Paper #191, p. 1-5.
T-2-3	Sasaki, K., Dindiwe, C. (2002) : An Integrated Mine Ventilation Simulator "MIVENA Ver. 6" with Applications - , Proc. of the North American/Ninth U.S. Mine Ventilation Symposium (Kingston, Canada), p. 243-51.
T-2-4	Ohga, K., Sasaki, K., Deguchi, G. and Fujioka, M. (2002) :�@Fundamental Tests on Carbon Dioxide Sequestration into the Coal Seam, Proc. of Sixth Int. Conf. On Green House Gas Control Technology, Paper #G3-1, p. 1-6.
T-2-5	Sato, H. (2002) : How to Evaluate Faculties, Endowments, and Enthusiasm for Learning Except for Scholastic Abilities - Study of the Interview for Entrance Examinations, J. of Univ. Entrance Exam., No. 12, p. 39-44 (in Japanese).
T-2-6	Wang, L., Yamashita, S., Sugimoto, F., Deng, S. and Liu, D. (2002) : A Visual Information System for Analyzing Rock Slope Displacement Based on Monitored Data, Int. J. Mater. Eng. Resour, Vol. 10, No. 1, p. 53-60.
T-2-7	Wang, L., Sugimoto, F., and Yamashita, S. (2002) : Estimation of Cavability by Using a Block Model and Fuzzy Sets, Journal of the Mining and Materials Processing Institute of Japan, Vol. 118, No. 7, p. 481-9.
T-2-8	Sato, M. and Yamaguchi, S. (2002) : Development of MGF Software Series on Multiphase Flows in Porous Media - Establishment of MGF2 by 3D Finite Element Method, Proc. of Int. Workshop on Present Status and Perspective of CO2 Sequestration in Coal Seam, Tokyo, Japan, p. 51-8.
T-2-9	Imai, T., Sugimoto, F., Kamoshida, N., Yamashita, S. and Furuzumi, M. (2002) : The Relation between Acoustic Emission Activity and Growth of Crack in the Fracture Process of Rocks, Journal of Japan Society of Engineering Geology, Vol. 43, No. 1, p. 14-23 (in Japanese).
T-2-10	Fujii, H. (2002) : A Study on Optimization Methods in Designing Vertical Ground Heat Exchangers for Ground-Coupled Heat Pump Systems, J. of Geothermal Research Society of Japan, Vol. 24, p. 29-46 (in Japanese).
T-2-11	Fujii, H. (2002) : A Study on Completion and Configuration of Heat Exchange Wells in Ground-Coupled Heat Pump Systems with Groundwater Flow, J. of Geothermal Research Society of Japan, Vol. 24, p. 191-205 (in Japanese).
T-2-12	Fujii, H. and Akibayashi, S. (2002) : Analysis of Thermal Response Test of Heat Exchange Wells in Ground-Coupled Heat Pump Systems, J. of Mining and Materials Processing Institute of Japan, Vol. 118, p. 75-80 (in Japanese).
T-2-13	Fujii, H., Akibayashi, S. and Ohshima, K. (2002) : Interpretation of Thermal Response Tests in Shallow Deposits, Geothermal Resources Council, Transaction, Vol. 26, p. 143-8.
T-2-14	Fujii, H., Akibayashi, S. and Ohshima, K. (2002) : Evaluation of Heat Exchange Wells in Ground-Coupled Heat Pump Systems - Effects of Natural Convection of Groundwater in Heat Exchange Wells -, J. of Geothermal Research Society of Japan, Vol. 24, No. 4, p. 329-38 (in Japanese).
DEPARTMENT OF MATERIALS-PROCESS ENGINEERING AND APPLIED CHEMISTRY FOR ENVIRONMENTS

K-1-1	Fujita. T., Yoshimi. I., Shibayama. A., Miyazaki. T., Murata. K. and Tsuji. Y. (2002) : New Fragmentation Methods to Liberate the Waste Materials for Recycling by Electrical Disintegration and Explosion in Water, Recycling and Waste Treatment in Mineral and Metal Processing, p. 257-66.
K-1-2	Fujita. T., Shibayama. A. (2002) : Liberation for the Pre-Treatment of Recycle by Means of Electrical Disintegration and Disintegration by Underwater Explosion, The Resources Processing Society of Japan, Vol.49, No. 4, p.187-96 (in Japanese).
K-1-3	Arima. H., Fujita. T. and Yen. W. T. (2002) : Gold Cementation from Ammonium Thiosulfate Solution by Zinc, Copper and Aluminum Powders, Materials Transaction, Vol. 43, No. 3, p. 485-93.
K-1-4	Uchida. A., Koyanaka. H., Okubo. S. and Fujita. T. (2002) : Removal of Mo(VI) Ion from Waste Water with Lead Compounds, Journal of the Mining and Materials Processing Institute of Japan, Vol. 118, No. 2, p. 81-5 (in Japanese). 
K-1-5	Liang. R., Kikuchi. E., Sakamoto. H., Fujita. T. and Numata. Y. (2002) : Zinc Dust Recycling Technique -Magnetic Separation of Fine Particles- , Journal of the Society of Powder Technology Japan, Vol.39, No. 3, p. 161-8 (in Japanese).
K-1-6	Koike, K., Takasaki, Y., Watanabe, H. and Masuko, N. (2002): Fundamental Studies on the Modification of Lead Anode in the Zinc Electrowinning, Journal of the mining and materials processing institute of japan, Vol.118, No.8, p.564-8 (in Japanese).
K-1-7	Shibayama. A., Yamagata. S., Yamamoto. Y., Abe. K., Miyazaki. T. and Fujita. T. (2002) : Liberation of the Liquid Crystal Display-Panel by the Electrical Disintegration and Recovery of each Component, Journal of the Mining and Materials Processing Institute of Japan, Vol. 118, No. 7, p. 490-6 (in Japanese).
K-1-8	Shibayama. A., Matsuda. M., Otsuki. A., Dodbiba. G., Fujita. T., Jeyadevan. B. and Takahashi. K. (2002) : The Recovery and Life Cycle Assessment of Nickel Particles in a Multi-Solenoid Open-Gradient Magnetic Separator, Magnetic and Electrical Separation, Vol. 11, No. 3, p. 127-39.
K-1-9	Shibayama. A., Miyazaki. T., Otomo. T., Fujita. T. and Shimada. K. (2002) : Relationship between Cain Structures and Viscosity in the Magneto-Rheological Suspensions Stable Dispersing Different Concentration of Iron Particles with Smectite, International Journal of Modern Physics B, Vol. 16, Nos. 17 and 18, p.2364-70.
K-1-10	Shibayama. A., Miyazaki. T., Yamaguchi. K., Murakami. K. and Fujita. T. (2002) : Electro-Magnetorheological Fluids Dispersing Zeolite Particles Containing Iron, International Journal of Modern Physics B, Vol. 16, Nos. 17 and 18, p. 2405-11.
K-1-11	Dodbiba. G., Shibayama. A., Miyazaki. T. and Fujtia. T. (2002) : Electrostatic Separation of the Shredded Plastic Mixtures Using a Tribo-Cyclone, Magnetic and Electrical Separation, Vol. 11, No. 1-2, p.63-92.
K-1-12	Yoshimi. I., Shibayama. A., Fujita. T., Abe. K., Miyazaki. T., Sato. M. and Yen. W. T. (2002) : Liberation of Materials by Electrical Disintegration for Recycling, Int. J. Soc. Mater. Resour., Vol. 10, No. 1, p. 66-70.
K-1-13	Zin OO. K., Shibayama. S., Miyazaki. T., Kuzuno. E., Fujita. T., Tsuji. Y. and Yen. W. T. (2002) : Study of Mutual Separation of Silicon and Quartz Using Liquid-Liquid Extraction, Int. J. Soc. Mater. Eng. Resour., Vol. 10, No. 1, p. 71-4.
K-1-14	Liu. K., Shibayama. A., Yen. W. T. and Fujita. T. (2002) : Selective Leaching of Platinum and Palladium by Sodium Chlorade and Sodium Hypochlorite, Journal of the Mining and Materials Processing Institute of Japan, Vol. 118, No. 12., p. 745-50.
K-1-15	Dodbiba. G., Haruki. N., Shibayama. A., Miyazaki. T. and Fujita. T. (2002) : Combination of Sink-Float Separation and Flotation Technique for Purification of Shredded PET-Bottle from PE or PP Flakes, International Journal of Mineral Processing, Vol. 65, p. 11-29.
K-1-16	Kim. Y., Matsuda M., Shibayama. A., Miyazaki. T. and Fujita. T. (2002) : Recovery of LiCoO2 from Waste Lithium Ion Batteries by Means of Flotation, Journal of the Mining and Materials Processing Institute of Japan, Vol. 118, Nos.10 and 11, p.687-693 (in Japanese).
K-1-17	Yasui. M., Takemura. S., Shibayama. A., Miyazaki. T., Yoshida. T. and Fujita. T. (2002) : A Study of the Supply-Demand of Rare Metal Resources, Journal of the Mining and Materials Processing Institute of Japan, Vol. 118, No. 12, p. 723-7.
K-1-18	Miyazaki. T., Shibayama. A. and Fujita. T. (2002) : Measurement of Surface Force of Fine Particles at a Short Distance in a Magnetic Fluid under an Electric and Magnetic Field, Journal of the Magnetics Society of Japan, Vol. 26, No.3, p.153-6 (in Japanese).
K-2-1	Shoji, T., Suzuki, M. and Yoshimura, N. (2002) : Research on Remediation of Copper and Zinc Dissolved Soil Using Electrokinetic Phenomenon, Journal of the Institute of Electrostatics Japan, Vol.26, No.2, p.79-83 (in Japanese).
K-2-2	Shoji, T., F. E. Huggins, G. P. Huffman, William P. Linak and C. Andrew Miller (2002) : XAFS Spectroscopy Analysis of Selected Elements in Fine Particulate Matter Derived from Coal Combustion, Energy & Fuels, Vol.16, No.2, p.325-9.
K-2-3	Nakayama, K., Shoji, T. and Makino, K. (2002) : Experimental Discussion on the Effect of Carboxylic Acid Addition on the Specific Surface Area of Calcium Hydroxide Powder Generated from Calcium Oxide, Journal of the Society of Materials engineering for Resources of Japan, Vol.15, No.1, p.8-15 (in Japanese).
K-3-1	Ohtani, N., Ohta, T., Watanabe, K. and Endo, K. (2002): The Role of Oil-Water Microinterface in Immobilized Phase-Transfer Catalysis, International Conference on Polymers and Organic Chemistry 2002(San Diego, USA), Abstract 30.
K-3-2	Ohtani, N., Yamashita, T., Kuroyanagi, H. and Tsuchimoto, D. (2002): Novel Thermo-Sensitive Hydrogels Derived from Vinylbenzyltributylphosphonium Salts, IUPAC Polymer Conference on the Mission and Challenges of Polymer Science and Technology (Kyoto, Japan), 34PB1-094.
K-3-3	Ohtani, N., Inoue, Y., Yamashita, T. and Tsunoda T. (2002): Temperature and Brine-Sensitive Flocculation Based on Poly(vinylbenzyltributylphosphonium chloride), IUPAC Polymer Conference on the Mission and Challenges of Polymer Science and Technology (Kyoto, Japan), 45PB2-054.
K-3-4	Itoh, H., Komatsuda, A., Ohtani, H., Wakui, H., Imai, H., Sawada, K., Otaka, M., Ogura, M., Suzuki, A. and Hamada, F. (2002): Mammalian HSP60 is quickly sorted into the mitochondria under dehydration, Eur. J. Biochem., vol. 269, p. 5931-8.
K-3-5	Matsumori, M., Itoh, H., Toyoshima, I., Komatsuda, A., Sawada, K., Fukuda, J., Tanaka, T., Okubo, A., Kinouchi, H., Mizoi, K., Hama, T., Suzuki, A., Hamada, F., Shoji, Y. and Takada, G. (2002): Characterization of the 105-KDa molecular chaperone: Indentification, biochemical properties, and localization, Eur. J. Biochem., vol. 269, p. 5632-41.
K-3-6	Kabuto, C., Higuchi, Y., Niimi, T., Hamada, F., Iki, N., Morohashi, N. and Miyano, S. (2002): Crystal Structure of Mono-, Di-, and Tri(p-tert-butyl)-thiacalix[4]arenes: Dimeric Self-inclusion Behavior, J. Incl. Phenem. Macrocyclic Chem., vol. 42, p. 89-98.
K-3-7	Narita, M., Itoh, J. and Hamada, F. (2002): A High Sensitively Fluorescent Chemo Sensory System Based on ?-Cyclodextrin Dimer Modified with Dansyl Moieties, J. Incl. Phenem. Macrocyclic Chem., vol. 42, p. 107-14.
K-3-8	Narita, M., Tashiro, E. and Hamada, F. (2002): Synthesis of a Selective Fluorescent Sensing System Based on ?-Cyclodextrin Dimer Modified with Pyrene and Tosyl on Hetero Rims, J. Incl. Phenem. Macrocyclic Chem., vol. 42, p. 137-44.
K-3-9	Narita, M., Dorjpalam, N., Teranishi, K. and Hamada, F. (2002): Selective Fluorescent Molecular Sensing Based on 2A,2D-Disulfonyl Dibenzosulfolane-Diphenyl-Capped ?-Cyclodextrin for Phenolic Guests, Anal. Sci., vol. 18, p. 711-3.
K-3-10	Makabe, A., Kinoshita, K., Narita, M. and Hamada, F. (2002): Guest-Responsive Fluorescence Variations of ?-Cyclodextrins Labeled with Hetero Functionalized Pyrene and Tosyl Moieties, Anal. Sci., vol. 18, p. 119-24.
K-3-11	Kondo, Y., Yamazaki, Y., Nashirozawa, N., Narita, M. and Hamada, F. (2002): Supramolecular Formation of Mono- and Bis-Modified Pyrene Cavitands and Their Fluorogenic Metal Sensory System in an Aqueous Solution, Int. J. Soc. Mater. Eng. for Resource, vol. 10, p. 106-12.
K-3-12	Shindo, T., Kato, M., Kitabayashi, S. and Ozawa, S. (2002): Several Factors Affecting the Novel Synthesis of Mesoporous Aluminosilicate MCM-41 through Non-hydrothermal Conditions, Int. J. Soc. Mater. Eng. Resour., Vol. 10, p. 165-72.
K-3-13	Shindo, T., Hirakawa, Y., Kitabayashi, S. and Ozawa, S. (2002): Characteristics of Pyrolyzed Materials from Cedar (Cryptomeria japonica D. Don) Bark evaluated by N2 isotherm, J. Soc. Mater. Eng. Resour. Jpn., Vol. 15, p. 43-8 (in Japanese).
K-3-14	Shindo, T., Hirakawa, Y., Kudo, H., Kitabayashi, S. and Ozawa, S. (2002): Characteristics of Pyrolyzed and Activated Carbonaceous Materials from Japanese Cedar Bark, J. Soc. Mater. Eng. Resour. Jpn., Vol. 15, p. 49-54 (in Japanese).
K-4-1	Ogawa, N., Moriya, Y. and Nakata, S. (2002): Interfacial Orientation of Porphyrin at the Liquid-Liquid Interface Using UV-vis External Reflection Spectroscopy, Proceedings of the International Solvent Extraction Conference (ISEC2002), Cape Town, South Africa, Vol.1, p.58-63.
K-4-2	Ogawa, N. (2002): Studies on the Acidification and Pollution Mechanism of Precipitation and Fog(Cloud), Rev. Polarogr. (Kyoto), Vol. 48(1), p.17-27 (in Japanese with English Abstract).
K-4-3	Kumagai, M. , Karube, K. , Sato, T. , Ohisa, N. , Amano, T. and Ogawa, N. (2002): A Near Infrared Spectroscopic Discrimination of Noodle Flours Using Principal-Component Analysis Coupled with Chemical Information, Anal. Sci., Vol. 18, p. 1145-50.
K-4-4	Kikuchi, R., Adzuhata, T., Okamura, T., Iwata, Y., Ozeki, T., Sera, K., Kajikawa, M. and Ogawa, N. (2002): Relationship between the Chemical Components in Rain and Fog Water in the Akita Hachimanntai Range and the Back trajectory, Tenki(Weather), Vol. 49, p. 457-64 (in Japanese with English Abstract).
K-4-5	Ozeki, T., Okada, T., Adzuhata, T., Ogawa, N. and Kajikawa, M. (2002): Application of Oblique Rotational Factor Analysis with Partially Non-Negative Constraints to Extraction of Ionic Pollutant Sources from Precipitation (Rain, Snow and Fog) of Japan, Current Topics in Analytical Chemistry (Research Trends), Vol. 3, p. 25-40.
K-4-6	Kumagai, M. , Suyama, H., Sato, T. , Amano, T. and Ogawa, N. (2002) : Discrimination of Plastics using a Portable Near Infrared Spectrometer,  J. Near Infrared Spectroscopy, in press.
K-4-7	Nakata, S., Kato, S. and Sugai, M. (2002): Oxygen Deficient Perovskite-type Oxides �\Crystal Structure and Its Applications�\, PETROTECH, Vol. 25, No. 5, p. 336-40 (in Japanese).
K-4-8	Nomura, M., Hamada, F. and Nakata, S. (2002): Reactions of 1,3-Dicarbonyl Compounds with Hexamethylenetetramine �\Facile Synthetic Method for 1,4-Dihydropyridine Derivatives �\, Nippon Kagakukaishi, No. 2, p. 141-5 (in Japanese).
K-4-9	Nomura, M., Kato, M., Sato, K. and Abe, N. (2002): Preparation of 6-Acetyl-2,2-dimethyl-4-chromanone as Constituents of Tussilago Farfara Linn, Nippon kagakukaishi, No. 2, p. 247-9 (in Japanese).
K-4-10	Hagiwara, K., Ebihara, T., Yamada, H., Shibuya, T., Naito, J., Ozawa, S. and Nakata, S. (2002): Dealumination of USY Zeolites by Thermal Treatment (Part 3) Effect of Exchangeable Sodium Ion, J. Jpn. Petrol. Inst., Vol. 45, No. 1, p. 45-52 (in Japanese).
K-4-11	Nakahara, Y., Ninomiya, R., Tagami, M., Sugai, M. and Nakata, S. (2002): Effect of Zn Addition to Sn-3Ag-5Bi Solder on Joint Strength and Joint Interface, Int. J. Mater. Eng. Res., Vol. 10, No. 2, p. 142-6.
K-4-12	Nakahara, Y., Ninomiya, R., Tagami, M., Sugai, M. and Nakata, S. (2002): The Effect on the Mechanical Properties of P Addition and Bi Content to Sn-Ag-In-Bi Solders and on Their Joint Strength with Cu, J. Jpn. Inst. Electr. Pack., Vol. 5, No. 3, p. 257-63 (in Japanese).
K-4-13	Gotoh, T., Miyazaki, Y., Chiba, K. and Kikuchi, K.-I. (2002): Significant increase in recombinant protein production of a virus-infected Sf-9 insect cell culture of low MOI under low dissolved oxygen conditions, J. Biosci. Bioeng., Vol. 94, No. 5, p. 426-33.
K-4-14	Gotoh, T. Chiba, K. and Kikuchi, K-I. (2002): Enhanced recombinant protein production with virus-infected Sf-9 insect cells by low temperature strategy, Proc. of 2nd international conference on recombinant protein production with prokaryotic and eukaryotic cells, Cernobbio (Italy) p31.
K-4-15	Kato, S., Matsuki, Y., Maruyama, T., Moriya, Y., Sugai, M. and Nakata, S. (2002): Synthesis and Electrical Properties of Cation Deficient Perovskite-type Oxides in the Ln-A-Ti-Al-O System (Ln=La, Nd; A=Ca, Sr), Int. J. Mater. Eng. Res., Vol. 10, No. 1, p. 61-5.
K-4-16	Kato, S., Ogasawara, M., Sugai, M. and Nakata, S. (2002): Synthesis and Oxide Ion Conductivity of New Layered Perovskite  La1-xSr1+xInO4-d, Solid State Ionics, Vol. 149, p.53-7.
K-4-17	Murakami, K., Shirai, M. and Arai, M. (2002): In-situ XAFS Study of Catalytically Active Species on Brown Coal during Coal Conversion Process, Topics in Catalysis, Vol. 18, Nos. 1-2, p. 119-23.
K-4-18	Murakami, K., Arai, M. and Shirai, M. (2002): Pyrolysis behavior of nickel-loaded Loy Yang brown coals: influence of calcium additive, Energy Fuels, Vol. 16, No. 3, p. 752-5.
K-4-19	Moriya, Y., Noriguchi, M., Hayashi, K., Nakamura, M., Kato, S., Sugai, M., Ogawa, N. and Nakata, S. (2002): Simple Devices Comprised of an Optical Cell and Prisms for Direct Spectrophotometric Measurement of Liquid-Liquid Interfacial Adsorbate, Int. J. Soc. Mater. Eng. Resour., Vol. 10, No. 2, p.147-52.
K-4-20	Nomura, M., Sato, K., Nakamura, M., Moriya, Y., Kato, S., Sugai, M. and Nakata, S.(2002): Studies on Characterization of Acid Properties and Application to Catalysis of Chemically Modified Natural Clinoptilolite, Scientific and Technical Reports of Faculty of Engineering and Resource Science, Akita University, No. 23, p. 13-22 (in Japanese).
DEPARTMENT OF MATERIALS SCIENCE AND ENGINEERING

Z-1-1	Kodama, N., Sasaki, N., Yamaga, M. and Masui, Y. (2002): Mechanism of Long-lasting Phosphorescence of Eu2+ in Melilite, Radiation Effects & Defects in Solids, Vol.157. p.915-9.
Z-1-2	Yamaga, M., Tanii, Y., Kodama, N. and Takahashi, T. (2002): Mechanism of Long-lasting Phosphorescence Process of Ce3+-doped Ca2Al2SiO7 melilite crystals, Phys. Rev., B65, p.2351081-11.
Z-1-3	Imashimizu, Y., Takahashi, T., Rikiyama, Y., Wakatsuki, Y. and Watanab?, J. (2002): Estimation of Actual Growth Rate in the Bridgman Growth of Tin Crystal by Recording the Temperature-Time Curves, Journal of the Society of Materials Engineering for Resources of Japan, Vol.15, No.1, p.21-7 (in Japanese).
Z-1-4	Imashimizu, Y. and Nagata, A. (2002): Growth Method for Obtaining Bulk Crystal of YBCO Superconductor *, Scientific and Technical Reports of Faculty of Engineering and Resource Science, Akita University, Vol.23, p.97-107. (*Note, in Japanese).
Z-1-5	Tsujiuchi,Y., Suto,J., Shibata,S., Ishimaru,T., Ihara,M., Masumoto,H., Goto.T.(2002), Preparation of Thin Films of Amorphous Silicon and Hydrogenated Amorphous Silicon by ECR Plasma Sputtering and the Effect on Membrane Protein Polypeptides Jointed with Hydrogenated Amorphous Thin Films., Proc. of 5th Int Conf. on Nano-Molecular Electronics, p.183-4.
Z-2-1	Asakura, S., Ishio, S., Okada, A. and Saito, H. (2002): Magnetic Domain Percolation of Cox(SiO2)100-x Granular Films, J.Magn. Magn. Mater., Vol.240, p.485-7.
Z-2-2	Takahoshi, H., Saito, H., Ishio, S., Yamaoka, T. and Okamoto, I. (2002): Magnetic Cluster Observation on Longitudinal Magnetic Recording Media Using MFM with Applied Magnetic Field, J. Magn. Soc. Japan, Vol. 26, No. 4, p. 284-8 (in Japanese with English Abstract).
Z-2-3	Ito, H., Saito, H. and Ishio, S. (2002): Post-annealing Effect on L10 Ordering in Compositionally Modulated FePt Thin Films, J. Japan Inst. Metals, Vol.66, No. 9, p. 889-92 (in Japanese with English Abstract).
Z-2-4	Ishio, S., Saito, H., Takahoshi, H., Ito, H. and Yamaoka, T. (2002): Recent Advances in Magnetic Force Microscope Technology for Magnetic Domain Structure Observation, J. Magn. Soc. Japan, Vol.26, No.10, p.1034-40 (in Japanese with English Abstract).
Z-2-5	Saito, H., Miyazaki, K. and Ishio, S. (2002): In situ Magnetic Hysteresis Measurement of Magnetic Tips in Magnetic Force Microscope, J.Magn. Magn. Mater., Vol.240, p.73-5.
Z-2-6	Sato, Y., Ishikawa, H. and Hara, M. (2002): Effect of Hydrogen Chloride Gas and Water Vapor on Hot Corrosion of Nickel at 923 K, J. Japan Inst. Metals, Vol. 66, No. 6, p. 590-6 (in Japanese).
Z-2-7	Sato, Y. and Hara, M. (2002): Chlorine-Induced High Temperature Corrosion and Hot Corrosion of Nickel and Nickel-Chromium Alloys, Journal of High Temperature Society, Vol. 28, No. 5, p. 219-25 (in Japanese).
Z-2-8	Fukumoto, M., Hara, M., Sano, M., Hirade, M. (2002): Electrochemical Control of Basicity of Fused Na2SO4 and Solubility of Al2O3, Cr2O3 and SiO2, Journal of the Society of Materials Engineering for Resources of Japan, Vol.15, No.1, p.16-20 (in Japanese with English Abstract).
Z-2-9	Fukumoto, M., Hara, M., Sato, Y., Kidachi, T., Nagataki, T. (2002): Molten Salt Electrodeposition of Ni Aluminide Surface Layer and High Temperature Oxidation Resistance, Journal of Japan Institute of Metals, Vol.66, No.7, p.684-9 (in Japanese with English Abstract).
Z-2-10	Fukumoto, M., Hara, M., Nagataki, T. (2002): Effect of Al Molten Salt Electrodeposition Treatment on High Temperature Oxidation of TiAl Intermetallic Compound, Corrosion Engineering, Vol.51, No.11, p.510-5 (in Japanese with English Abstract).
Z-3-1	Sugiyama, S. and Taimatsu, H. (2002): Preparation of WC-WB-W2B Composites from B4C-W-WC Powders and their Mechanical Properties, Materials Transactions JIM, Vol. 43, No. 5, p. 1197-201.
Z-3-2	Lu, X.Y., Nagata, A., Watamabe, K., Nojima, T., Kamio, D., Sugawara, K., Kamada, S. (2002): The texture and formation of (Bi,Pb)-2223 phase with Ag2O, MgO and B2O3 additions after partial-melting and solidification in high magnetic fields, Advances in Cryogenic Engineering (Mater.), Vol.48 p.383-90. 
Z-3-3	Lu, X.Y., Nagata, A., Watamabe, K., Nojima, T., Sugawara, K., Kamada, S. (2002): Crystal growth of Bi-2201 phase in magnetic fields, Phsysica C, Vol. 382, p.27-32.
Z-3-4	Lu, X.Y., Nagata, A., Okumura, K., Sugawara K., Kamada, S. (2002): Formation and microstructure of (Bi,Pb)-2223 phase in the diffusion process, Phsysica C, Vol. 378-81, p.669-73.
Z-3-5	Lu, X.Y., Nagata, A., Watamabe, K., Nojima, T., Sugawara, K., Kamada, S. Hanada, S. (2002): Microstructure and critical current densities of (Bi,Pb)-2223 superconductors solidified in high magnetic fields, J. Japan Inst. Metals, Vol. 66/4, p.254-9.
Z-3-6	Atsumi, T., Nishi, I. and Taimatsu, H. (2002): Microstructure and Electrical Properties of ZnO Doped with PbO, Journal of the Ceramic Society of Japan, Vol. 110, No. 9, p. 813-817.
Z-4-1	Liu, W., Lu, M. and Goto, S. (2002): Effect of Immediate Quenching after As-sintered on Microstructure of WC Phase and Strength of WC-14mass%TiC-8mass%Co, Int. J. Soc. Mater. Eng. Resour., Vol.10, No.1, p.117-20.
Z-4-2	Il, B., Park, H., Lee, M., Goto, S., Aso, S. and Komatsu, Y. (2002): Evaluation of Corrosion Resistance on Coarted Stainless Steel Separator at Cathode Side for Molton Carbonate Fuel Cell, Mater. Trans., Vol.43, No.3, p.593-600.
Z-4-3	Yamada, S., Goto, S., Aso, S., Komatsu, Y. and Konno, T. (2002): Impact Property of Decarburized Spheroidal Graphite Cast iron, J. Japan Foundry Engineering Society, Vol.74, No.2, p.90-7(in Japanese with English Abstract).
Z-4-4	Kimura, M., Asari, K., Goto, S. and Aso, S. (2002): Residual Stress and Bonding Strength in the Electrical Sialon Ceramics Joint Made by Using the Brazing Metal Layer, Int. J. Soc. Mater. Eng. Resour., Vol.10, No.1, p.81-7.
Z-4-5	Yamada, S., Goto, S., Aso, S. and Komatsu, Y. (2002): Some Behaviors and Characteristics of Decarburized Layer in Spheroidal Graphite Cast Iron, Int. J. Soc. Mater. Eng. Resour., Vol.10, No.1, p.88-92.
Z-4-6	Okada, K., Idetsu, S., Goto, S., Aso, S. and Komatsu, Y. (2002): Surface Hardening of Some Cast Irons with Inserted Hard Alloy Particles, Int. J. Soc. Mater. Eng. Resour., Vol.10, No.1,  p. 93-8.
Z-4-7	Ike, H., Shobuzawa, Y., Goto, S., Aso, S. and Konishi, N. (2002): The Effect of Insert of WC Powder on The Surface Hardening of Non Magnetic Foundry Materials, Int. J. Soc. Mater. Eng. Resour., Vol.10, No.1, p.75-80.
Z-4-8	Okada, K., Ike, H., Goto, S., Aso, S. and Komatsu, Y. (2002): Study on Microstructure and Hardness of Hard Alloy Powder Layer Inserted by Molten Cast Steel, J. of Soc. Mater. Eng. Resour. Japan, Vol.15, No.1, p.1-7(in Japanese with English Abstract).
Z-4-9	Okada, K., Goto, S., Aso, S. and Komatsu, Y. (2002): Improvement of Surface Hardness of Cast Steel Using Inserted Alloy Powder Layer, J. Japan Foundry Engineering Society, Vol.74, No.8, p.497-505(in Japanese with English Abstract).
Z-4-10	Goto, S., Aso, S. and Komatsu, Y. (2002): High-temperature Strength of High Chromium White Cast Irons, Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills, p33-47.
Z-4-11	Kimura, M., Asari, K., Goto, S., Aso, S. and Oguchi, K. (2002): Measurement of Residual Stress on the Electrical Ceramics/Metal Joint, J. Soc. Mater. Eng. Resour. Japan, Vol.15, No.2 (in Japanese with English Abstract) (in press).
Z-4-12	Goto, S., Kim, B., Park, H., Belov, N. A., Zolotorevskij, V. S., Aso, S. and Komatsu, Y. (2002): Application of Multiphase Eutectic to Development of High Strength Cast Aluminum Alloys, Vol.15, No.2 (in Japanese with English Abstract) (in press).
Z-4-13	Yamada, S., Konno, T., Goto, S., Aso, S. and Komatsu, Y. (2002):Observation of Pearlite-ring and Graphite Particles in Decarburized Spheroidal Graphite Cast Iron, Proc. the seventh Int. Sympo. on the Science and Processing of Cast Iron, paper No.32 (Barcelona, Spain).
Z-4-14	Komatsu, Y., Goto, S. and Aso, S. (2002): An Experimental Study on Ironmaking of the Mukaihama Iron Sand Based on the Tatara-buki Ironmaiking Process and on Casting of the Obtained Iron Bear -A few Finding Obtained from Creative Techno-Craft-, Scientific and Technical Reports of Faculty of Engineering and Resource Science, Akita University, Vol.23, p.23-32 (in Japanese with English Abstract).
Z-4-15	Sugafuji, A.,Sirasaki, Y., Oda, Y. and Tagami, M. (2002):Sliding Properties of Sintered Materials with Cutting Powders of Graphite Growth-treated Cast Iron, Vol.74, No.6, p.149-55.
Z-4-16	Sugafuji, A., Tagami, M., Sirasaki, Y. and Oda, Y. (2002): Sliding properties of hypereutectic Al-23%Si-6%Cu-1%Mg alloy composites containing dispersed graphite, Journal of Japan Institute of Light Metals, Vol.52, No.8, p.365-70.
Z-4-17	Kato, K., Tagami, M., Yamada, S. and Takeda, T. (2002): Development of Solid Lubricants Dispersed Bronze Bearing Material by Powder Metallurgy(First Report), Journal of the Japan Society of Powder and Powder Metallurgy, Vol.49, No.9, p.812-7.
Z-4-18	Kato, K., Yamada, S., Tagami, M. (2002): Effects of Elemental Cr Addition on Sintering and Mechanical Properties of Cu-Sn Alloy Compacts, World Congress on Powder Metallurgy & Particulate Materials. (Florida, U.S.A.), Part.8, p.106�|12.
Z-4-19	Hartono, W., Aso, S., Goto, S. and Komatsu, Y. (2002): Influence of Cooling Rate on Transformation Behavior of Fe-25mass%Cr-C-B Eutectic Cast Alloys, J. Japan Foundry Engineering Society, Vol.74, No.1, p.36-42 (in Japanese with English Abstract).
Z-4-20	Aso, S., Goto, S., Ike, H., Shobuzawa, Y. and Konishi, N. (2002): Partial Reinforcement of Grey Cast Iron by Inserted TiC Particles, J. Japan Foundry Engineering Society, Vol.74, No.2, p.83-9(in Japanese with English Abstract).
Z-4-21	Hartono, W., Aso, S., Goto, S. and Komatsu, Y. (2002): Iron Matrix Transformations and Mechanical Properties of Fe-25Cr-C-B Eutectic Cast Alloys, Int. J. Soc. Mater. Eng. Resour., Vol.10 No.1, p.99-105.
Z-4-22	Shimizu, K., Asakura, S., Goshima, T., Nakasu, A., Aso, S., Hiratsuka, S. and Hatate, M. (2002): Development and Validity of CAI Teaching Materials for Foundry Engineering, J. Japan Foundry Engineering Society, Vol.74, No.6, p.357-62 (in Japanese with English Abstract).
Z-4-23	Aso, S., Goto, S., Komatsu, Y., Ike, H. and Shimizu, K. (2002): Composite reinforcement of cast iron surface by inserted WC powder, Proc. the seventh Int. Sympo. on the Science and Processing of Cast Iron, paper No.32(Barcelona, Spain).
Z-4-24	Shimizu, K., Kiguchi, S, Hatate, M., Aso, S. and Hiratsuka, S. (2002): Development of Tool for Training of Manufacturing Engineer and Its Evaluation, Materials Process Technology Center Japan, Vol.43, No.9, p.30-4.
Z-4-25	Aso, S., Goto, S., Ike, H., Shobuzawa, Y. and Konishi, N. (2002): Composites and High Function in Cast Iron: Inserted Cast Iron into Hard Alloy Chips, Japan Society for the Promotion of Science, Report of the No.24 Cast Iron Group for Casting,p.75-83 (in Japanese).
Z-4-26	Aso, S., Goto, S., Ike, H., Shobuzawa, Y. and Konishi, N. (2002): Composites and High Function in Cast Iron: Residual Stress in Inserted High Chromium White Cast Iron into Hard Alloy Chips, Japan Society for the Promotion of Science, Report of the No.24 Cast Iron Group for Casting, p.84-91 (in Japanese).
Z-4-27	Aso, S., Goto, S., Ike, H., and Shobuzawa, Y. (2002): Composites and High Function in Cast Iron: Surface Hardening of Cast Iron by inserted WC Particles, Japan Society for the Promotion of Science, Report of the No.24 Cast Iron Group for Casting, p.92-100 (in Japanese).
Z-4-28	Aso, S., Goto, S., Ike, H., Shobuzawa, Y. and Konishi, N. (2002): Composites and High Function in Cast Iron: Particle Reinforcement of Grey Cast Iron by Inserted TiC Particles, Japan Society for the Promotion of Science, Report of the No.24 Cast Iron Group for Casting, p.101-9 (in Japanese).
Z-4-29	Aso, S., Goto, S., Ike, H., Shobuzawa, Y. and Konishi, N. (2002): Composites and High Function in Cast Iron: Particle Reinforcement of 27%Cr Cast Iron by Inserted Cermet Particles, Japan Society for the Promotion of Science, Report of the No.24 Cast Iron Group for Casting, p.110-4 (in Japanese).
Z-4-30	Ohguchi, K., Tagami, M., Umeda, K., (2002): Effect of Fe-Ni Welding Rod on Weldability and Fatigue Characteristics of Welded Joint in Spheroidal Graphite Cast Iron, Journal of Japan Foundry Engineering Society, Vol.74, p.149-55 (in Japanese).
Z-4-31	Ohguchi, K., Sasaki, K., Elastic-Plastic-Creep Simulation of Pb/Sn Solder Alloys by Separation of Plastic and Creep, Transactions of the Japan Society of Mechanical Engineers, Vol.68-673, p.1328-35 (in Japanese).
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING

J-1-1	Izumi, H. and Tamamoto, H. (2002): Evaluation of the Security against Tamper Resistance Attacks on Person Authentication System by Using the IC-cards and Fingerprint Recognition Technology, Japan Journal of Medical Informatics, Vol. 22, No. 1, p.111-4 (in Japanese).
J-1-2	Kageyama, Y., Nishida, M. and Oi, T. (2002): Segment Analysis for Lineament Detection Using Remote Sensing Data, T.IEE Japan, Vol.122-C, No.4, p.639-47 (in Japanese with English Abstract).
J-1-3	Kageyama, Y., Nishida, M. and Asano, S. (2002): A Method for Estimating Colors due to Fuzzy Reasoning, Int. J. Soc. Mater. Eng. Resour. , Vol. 10, No.2, p.153-7.
J-1-4	Kageyama, Y., Nishida, M. and Takeda, T. (2002):Extraction of Sea Surface Temperature in Local Region from NOAA AVHRR Data, IEEE 2002 Inter. Geoscience and Remote Sensing Symposium, Toronto, Canada, INT2.A28.05 (CD-ROM).
J-3-1	Kagaya, H.M., Takaya, M.S. and Soma, T. (2002): Increase of Solid Solubility of Si, Ge, Cu, Li in Al under Pressure and Mechanical and Thermal Properties of ƒ¿-phase Al-based Systems, Recent Res. Devel. Mat. Sci., Vol. 2, p.423-53. 


DEPARTMENT OF MECHANICAL ENGINEERING

M-1-1	Sakon, T., Awaji, S., Motokawa, M. and Belanger, D.P. (2002): Large Random-Field Behavior above the Vacancy Percolation Concentration Threshold: Fe0.84Zn0.16F2, J. Phys. Soc. Jpn., Vol. 71, p. 411-3.
M-1-2	Sakon, T., Koyama and K., Motokawa, M. (2002): Electron Spin Resonance Experiments at Ultralow Temperatures by means of a Dilution Refrigerator, Rev. Sci. Instrum., Vol. 73, p.1242-6.
M-1-3	Sakon, T., Sato, N. K., Nakanishi, N. K., Komatsubara, T. and Motokawa, M. (2002): Magnetic Phase Diagram of UPd2Al3 in High Magnetic Fields, Jpn. J. Appl. Phys., Vol. 41, Part 1, No. 6A, p. 3673-7.
M-1-4	Koyama, K., Yoshida, M., Tomimatsu, T., Sakon, T., Li, D. X., Shirakawa, M., Ochiai , A., and  Motokawa, M. (2002): Observation of Cyclotron Resonance in Rare-Earth Monopnictides Microwave Region,  J. Physics and Chemistry of Solids, Vol. 63, p.1227-30.
M-1-5	Sakon, T., Nojiri, H., Koyama, K., Asano, T., Ajiro and Y., Motokawa, M. (2002): ESR at Ultra-low temperatures and Observation of New Mode in Cu-Benzoate, Proc. the Third Asia Pacific EPR/ESR Symposium (Kobe, Japan), p. 807-12.
M-2-1	Ohyoshi, T. (2002): Plan and Do of the First Year Seminar as an Introductory Curriculum for Freshmen, Journal of the Japanese Society for Engineering Education, Vol. 50, No.2, p. 14-8.
M-2-2	Liu, G. R., Han, X. and Ohyoshi, T. (2002): Computational Inverse Techniques for Material Characterization Using Dynamic Response, Int. Jour. Soc. Mater. Eng. Resources, Vol. 10, p. 26-33.
M-2-3	Sugawara, M., Irvine, T. F. and Tago, M. (2002): Heat and Mass Transfer Characteristics of a Temperature and Concentration Combined Convection Due to a Vertical Ice Plate Melting, Trans. ASME Journal of Heat Transfer, Vol. 124, December (in press).
M-3-1	Watanabe, M., Sawada, T, Ohbayashi, T. and Iguchi, M. (2002): Study on the Performance of Turbine Blade under Low Vacuum, Transactions of Japan Society of Mechanical Engineers, Ser. B, Vol. 68, No. 671, p.2064-70.
M-3-2	Kamiya, O., Chen Z. W. and Kikuchi, Y. (2002): Microporosity formation in partially melted zone during welding of high nitrogen austenitic stainless steels, Journal of Materials Science, Vol. 37, p. 2475-81.
M-3-3	Moritoki, H. and Kamiya, O. (2002): Prediction of Fracture in Plate Forging, Transactions of the Japan Society of Mechanical Engineers, Vol. 68, No. 672, p. 1170-7 (in Japanese with English Abstract).
M-3-4	Moritoki, H. and Kamiya, O. (2002): Disturbed Boundary Condition in Localized Necking Analysis by Storen and Rice, Transactions of the Japan Society of Mechanical Engineers, Ser. A, Vol. 68, No. 672, p. 1178-84 (in Japanese with English Abstract).
M-3-5	Kamiya, O., Uchida, T, Kimura, M. and Ishikawa, T. (2002): Ecological Micro-cutting Wire Saw Bonding Diamond Grain and Metal Wire, Scientific and Technical Reports of Faculty of Engineering and Resource Science, No. 23, p. 41-7 (in Japanese with English Abstract).
M-3-6	Kamiya, O., Kikuchi, Y. Chen Z. W. (2002): Mechanical Properties of Weld Metal for High Nitrogen Stainless Steel, Proceedings of International Conference on Advanced Structural Steel, ICASS 2002 (Tsukuba, Japan), p. 321-2.
M-3-7	Kamiya, O., Chen Z. W., Kikuchi, Y. and Ohyoshi, T. (2002): Weldability Study of Hith Nitrogen Austenaitic Stainless Steels, Proceedings of International Conference on Advanced Materials Development and Performance, AMDP2002, CD-file, Metal-paper 3-10 (in CD-ROM).
M-3-8	Tanaka, M., Kato, R. and Kimura, Y. (2002): Simulation of Size Distribution of Grain-Boundary Cracks by a Multicrack Growth Model, Journal of Materials Science Letters, Vol. 21, No. 12, p. 935-8.
M-3-9	Tanaka, M., Kato, R. and Kayama, A. (2002): Size Distribution of Surface Cracks and Crack Patterns in Austenitic SUS316 Steel Plates Fatigued by Cyclic Bending, Journal of Materials Science, Vol. 37, No. 18, p. 3945-51.
M-3-10	Tanaka, M., Kato, R., Kimura, Y. and Kayama, A. (2002): Automated Image Processing and Analysis of Fracture Surface Patterns Formed during Creep Crack Growth in Austenitic Heat-Resisting Steels with Different Microstructures, Proceedings of the First International Conference on Advanced Structural Steels (ICASS 2002), May 22-24, Tsukuba International Congress Center, Tsukuba, Japan, p. 205-6.
M-3-11	Tanaka, M., Kato, R., Kimura, Y. and Kayama, A. (2002): Automated Image Processing and Analysis of Fracture Surface Patterns Formed during Creep Crack Growth in Austenitic Heat-Resisting Steels with Different Microstructures, ISIJ International, Vol. 42, No. 12, p. 1412-8.
M-4-1	Doki, H., Hiramoto, K., Saito, I. and Miyazaki, T. (2002): A Simultaneous Optimal Design for Cantilevered Pipes Conveying Fluid (Experimental Verification for a Combined Pipe Conveying Fluid), Transactions of the Japan Society of Mechanical Engineers, Ser. C, Vol. 68, No. 667, p. 817-24, (in Japanese with English Abstract).
M-4-2	Doki, H., Hiramoto, K., Tanaka, M. and Iwami, T. (2002): Development of New Ski-system for Legs-disabled Persons, The Engineering of Sports 4, Edited by S. Ujihashi and S. J. Haake, Blackwell Publishing, p. 609-15.
M-4-3	Son, H., Obinata, G., Doki, H. and Hiramoto, K. (2002): Simultaneous Optimization of Structure and Control Systems Based on Analytical Approach (The Case of DVDFB Control Method), Transactions of the Japan Society of Mechanical Engineers, Ser. C, Vol. 68, No. 670, p. 1728-34 (in Japanese with English Abstract).
M-4-4	Hayase, T., Ishizawa, K., Hayashi, S. and Iimura, I. (2002): Hydraulic Servo System with Mechanically Adjustable Compliance, Trans. ASME, Journal of Dynamic Systems, Measurement, and Control, Vol. 124, p. 168-75.
M-4-5	Sasaki, Y., Nishi, T. and Iimura, I. (2002): Position-based Impedance Control of Cylinder for Oil Hydraulic Servo Systems, Proc. the 5th Int. Sympo. on Fluid Power (Nara, Japan), p. 525-30.
M-4-6	Iwami, T., Doki, H. and Sakurai, H. (2002): Studies on the Estimation of Muscular Tension and the Action of Antagonists in Skiing, Journal of Japan Society of Sports Industry, Vol. 12, No. 1�C p. 11-9 (in Japanese with English Abstract).
M-4-7	Iwami, T., Doki, H. Sakurai, H. and Nagai, T. (2002): Analysis Method for Biomechanism of Skiing Turns, Transactions of the Japan Society of Mechanical Engineers, Ser. C, Vol. 68, No. 666�C p. 562-8 (in Japanese with English Abstract).

DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING

E-1-1	Yoshimura, N. and Kumagai, S. (2002): Polymeric Materials Used for Outdoor Insulation, J. of Institute of Engineers on Electrical Discharges in Japan, Vol. 45, No. 4, p. 61-6 (in Japanese).
E-2-1	Sato, S. (2002): Liquid Crystal Microlens, O plus E, Vol. 24, No. 7, p. 729-33 (in Japanese).
E-2-2	Sato, S. (2002): Applications of Liquid Crystal to Optical Devices, J. of the Japanese Liquid Crystal Society (Ekisho), Vol. 6, No. 4, p. 364-75 (in Japanese).
E-2-3	Maehara, T. and Sato, S. (2002): Measuring and Analyzing Apparatus for Parameters in Transmittance Type Liquid Crystal Panels (LCD Analyzer, LCA-LU4), Electronic Materials (Denshizairyo), Vol. 41, No. 6 (Supplement), p. 156-63 (in Japanese).
E-2-4	Tanaka, M. and Sato, S. (2002): Focusing Properties of Liquid Crystal Lens Cells with Stack-Layered Structure in the Millimeter-Wave Region, IEEE Microwave and Wireless Components Letters, Vol. 12, No. 5, p. 163-5.
E-2-5	Tanaka, M. and Sato, S. (2002): Electrically Controlled Millimeter-Wave Focusing Properties of Liquid Crystal Lens, Jpn. J. Appl. Phys., Vol. 41, No. 8, p. 5332-3.
E-2-6	Ye. M. and Sato, S. (2002): Optical Properties of Liquid Crystal Lens of Any Size, Jpn. J. Appl. Phys., Vol. 41, No. 5B, p. L571-3.
E-2-7	Ye, M. and Sato, S. (2002): A Liquid Crystal Lens of Novel Structure, 19th Int. Liquid Crystal Conf. (Edinburgh UK), P337.
E-2-8	Ye, M. and Sato, S. (2002): New Liquid Crystal Lens, Optics Asia (Shanghai, China), SPIE (The Int. Society for Optical Engineering), Adaptive Optics and Applications‡U, Vol. 4926 (PA15), 4926-15, p. 75-80.
E-2-9	Maehara, T., Kurata, T. and Sato, S. (2002): Analyzing Apparatus for Reflective Liquid Crystal Cells (LCD Analyzer, LCA-LU1R), Monthly Display, Vol. 8, No. 12, p. 41-7 (in Japanese).
E-2-10	Wang, B., Ye, M. and Sato, S. (2002): Numerical Simulation of a Lens-Shaped Liquid Crystal Cell, 19th Int. Liquid Crystal Conf. (Edinburgh, UK), P917.
E-2-11	Yanase, S., Ouchi, K. and Sato, S. (2002): Molecular Orientation States and Optical Properties of Liquid Crystal Microlenses with an Asymmetric Electrode Structure, Jpn. J. Appl. Phys., Vol. 41, No. 3A, p. 1482-8.
E-2-12	Yanase, S., Ouchi, K. and Sato, S. (2002): Imaging Properties of a Double-Layered Liquid Crystal Microlens, Jpn. J. Appl. Phys., Vol. 41, No. 6A, p. 3836-40.
E-2-13	Wang, B., Ye, M, Honma, M. Nose, T. and Sato, S (2002): Liquid Crystal Lens with Spherical Electrode, Jpn. J. Appl. Phys., Vol. 41, No.11A, p. L1232-3.
E-2-14	Sato, Y., Hishinuma, T. and Sato, S. (2002): Growth of InGaN Thin Films on Polycrystalline Metal-foil Substrates and Their Photoluminescence Properties, Int. Workshop on Nitride Semiconductors (Aachen, Germany), 115, p.155.
E-2-15	Sato, Y., Kawamura, T. and Sato, S. (2002): A Method of Preparing Thin-Film Micro-PTC Thermistors Based on BaTiO3 Using YAG-Laser Irradiation, Electronics and Communications in Japan (Part ‡U: Electronics), Vol. 85, Issue 11, p. 25-31.
E-2-16	Yamaguchi, R. and Sato, S. (2002): A Novel Patterning Method of Liquid Crystal Alignment by Azimuthal Anchoring Control, Jpn. J. Appl. Phys., Vol. 41, No. 8A, p. L889-91.
E-2-17	Yamaguchi, R., Goto, Y. and Sato, S. (2002): Patterning Method of LC Alignment on the Rubbed Photo-reactive Polymer Surface, Proc. of The 9th Int. Display Workshops (IDW�f2002, Hiroshima), LCT5-12, p. 73-6.
E-2-18	Yamaguchi, R., Nagato H. and Sato, S. (2002): Sensitized Fluorescence of Dichroic Dye in Emissive Type Liquid Crystal Displays, 19th Int. Liquid Crystal Conf. (Edinburgh, UK), P70. 
E-2-19	Yamaguchi, R., Goto, Y., Hafiz, H. and Sato, S. (2002): A Novel Patterning Method of Liquid Crystal Alignment by Anchoring Control, 19th Int. Liquid Crystal Conf. (Edinburgh, UK), P71.
E-2-20	Yamaguchi, R., Nagato, H., Hafiz, H .and Sato, S. (2002): Improvement of Fluorescent Liquid Crystal Displays by Sensitization Effects, Proc. of The 9th Int. Display Workshops (IDW�f2002), (Hiroshima, Japan), LCTp3-5, p. 173-6
E-2-21	Wang, B., Ye, M., Yamaguchi, R. and Sato, S. (2002): Novel Method for Pretilt Angle Measurement Using Liquid Crystal Lens Cell, Jpn. J. Appl. Phys., Vol. 41, No. 8, p. 5307-10.
E-2-22	Kawamura, M. and Sato, S. (2002): Determination of Anchoring Energy in Nematic LC Cells with Controllable Twist Angles by Using a Stokes Parameter Method, 19th Int. Liquid Crystal Conf. (Edinburgh, UK), P350.
E-2-23	Kawamura, M. and Sato, S. (2002): Near-Infrared Stokes Parameter Method for Determining Two-Dimensional Cell Thickness and Twist Angle Distributions of Liquid Crystal Color Displays, The Int. Symp. on Optical Science and Technology, SPIE�fs 47th Annual Meeting (Seattle, USA), Liquid Crystals ‡Y, 4799-29, Proc. SPIE, Vol. 4799-29.
E-2-24 	Kawamura, M. and Sato, S. (2002): Polarization-Controlling Liquid Crystal Devices with a Stacked-Electrode Structure, The Int. Symp. on Optical Science and Technology, SPIE�fs 47th Annual Meeting (Seattle, USA), Liquid Crystals ‡Y, 4799-36, Proc. SPIE, Vol. 4799-36.
E-2-25	Kawamura, M. and Sato, S. (2002): A Measurement of Hyperfine Cell Parameter Distributions of Each Pixels in the Full-Color LCD Panel by Using Near-Infrared Stokes Parameters, Proc. of The 9th Int. Display Workshops (IDW�f2002), (Hiroshima, Japan), LCT3-1, p. 49-52.
E-2-26	Kawamura, M., Goto, Y. and Sato, S. (2002): An Accurate Measurement of the Azimuthal Anchoring Strength in Polyimide Coated Liquid Crystal Cells, ASID Asia Display (Singapore), p. 175-8.
E-3-1	Inoue, I and Sasaki, K. (2002): Measurements of EM Noise at Breaking Arc for Some Ag Compounds, Proc. of 21st Int. Conf. on Electrical Contacts (Zurich, Switzerland), p. 146-53.
E-3-2	Tamura, T., Yoshida, Y., Inoue, H. and Murata, K. (2002): A Measurement on Sensitivity Factors of Polyvinylidene Fluoride (PVDF) Transducers, Jpn. J. Appl. Phys., Vol. 41, Part 1, No. 5B, p. 3295-6.
E-3-3	Imano, K. and Nishihira, M. (2002): An Ultrasonic Displacement Measurement Method Using Double Frequencies, Ultrasonic Technology, Vol. 14, No. 4, p. 50-3 (in Japanese).
E-3-4	Tanaka, M. and Inoue, H. (2002): A Study on Walk-Recognition in a Wooden House by Comparing Footstep Spectra, Trans. IEE of Japan, Vol. 122-C, No. 3, p. 525-6 (in Japanese with English Abstract).
E-3-5	Tanaka, M., Miyashita, T., Inoue, H. and Niiyama, Y. (2002): Measurements of Visual Evoked Potential by Burst Noise on TV Picture, J. of the Institute of the Image Information and Television Engineers, Vol. 56, No. 5, p. 846-8 (in Japanese).
E-3-6	Tanaka, M., Sasajima, K., Inoue, H. and Takagi, T. (2002): Programmable Composite Noise Generator (P-CNG) �\As Class A Noise Simulator and Its Application to Opinion Test on TV Picture Degradation�\, IEICE Trans. Commun., Vol. E85-B, No. 7, p. 1352-9.
E-3-7	Kayano, Y., Tanaka, M., Drewniak, J.L. and Inoue, H. (2002): Common-Mode Current due to a Trace on a PCB with a Guard-Band �\Experiment and FDTD Modeling�\, 2002 Int. Conf. on Electronics Packaging (Tokyo, Japan), p. 316-21.
E-3-8	Kayano, Y., Tanaka, M., Inoue, H. and Drewniak, J.L. (2002): A Study on Suppression of Common-Mode Current due to a Trace on a PCB, 2002 Int. Session on Electromechanical Devices (Yokohama, Japan), IEICE Technical Report, EMD2002-86, p. 77-82.
E-3-9	Nishihira, M., Kaido, M. and Imano, K. (2002): Experimental Determination of Piezoelectric Constants of Transversal Effects of Pb(Zr,Ti)O3 (PZT) Transducer Using Transient Response, Jpn. J. Appl. Phys., Vol. 41, Part 1, No. 5B, p. 3354-5.
E-3-10	Kasuga, T. and Inoue, H. (2002): Estimation for Wideband Electromagnetic Field Distribution from PCB with Switching Transistor, 2002 Int. Session on Electromechanical Devices (Yokohama, Japan), IEICE Technical Report, EMD2002-85, p. 71-6.
E-3-11	Kasuga, T., Tanaka, M. and Inoue, H. (2002): FDTD Modeling for PCB Model with a Switching Transistor, Trans. IEICE (C), Vol. J85-C, No. 4, p. 304-5 (in Japanese).
E-3-12	Kasuga, T., Tanaka, M. and Inoue, H. (2002): Estimation on Magnetic Near Field Noise from PCB by FDTD Implemented Non-Linear Switching Transistor, 2002 IEEE Int. Symp. on Electromagnetic Compatibility (Minneapolis, USA), Vol. 2, p. 727-32.
E-4-1	Tajima, K., Matsuda, H., and Taniguchi T. (2002): A RNA Model for Stator of a Parametric Motor Considering the Magnetic Flux Distribution Flow into the Rotor, Scientific and Technical Reports of Faculty of Engineering and Resource Science, Akita Univ., No. 23, p. 59-65.

DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING

C-1-1	Shimizu, K., Hamaoka, H., Kimura, K., Nonaka, H. and Funayama, Y. (2002): An Analysis of the User Evaluation for the �gMoshi-Moshi Pitt�h, Road, Vol.739, p.68-73
C-1-2	Hamaoka, H. and Morichi, S. (2002): A study on the cause of rear-end collision at the merging section of the grade separated crossing, Infrastructure Review, No.19, p.787-91
C-1-3	Nakanishi, T., Hamaoka, H., Shimizu, K. and Takano, H. (2002): A study on the characteristics of driver's eye-movement at highway in case of short sight distance, Journal of Japan Society of Traffic Engineers, No.22, p.25-8
C-1-4	Hamaoka, H., Uchikawa, M. and Shimizu, K. (2002): A Study on the Evaluation of Regional Cooperation based on the Integration of the Public Facilities, Scientific and Technical Reports of Faculty of Engineering and Resource Science, Akita University, No.23, p.73-80
C-2-1	Usuki, S., Sasaki, T., Atsumi, A. and Sharma P. (2001): Shearing Stress of Longitudinal Rib Plate of Hybrid Timber Beam and Orthotropic Steel Deck, J. Structural Eng., JSCE, Vol. 47A, III, p. 1221-7 (in Japanese with English Abstract).
C-2-2	Hasebe, K., Usuki and S., Sasaki T. (2001): Effect of Butt Joint on Bending Behavior of Prestressed Laminated Timber Deck, J. Structural Eng., JSCE, Vol. 47A, III, p. 1185-92 (in Japanese with English Abstract).
C-2-3	Sasaki, T., Usuki,S., Sharma, M.,Iijima, Y.,Honda, H. and Atsumi, A.(2001):Field Experiment of a Hybrid Timber-Steel Deck Roadway Bridge, IABSE Conference on Innovative Wooden Structures and Bridges (Lahti,Finland), p.181-6.
C-2-4	Honda, H., Usuki, S., Sasaki, T. and Mishina, Y. (2001): Structural Performance of Deck Arch Timber Highway Bridge, IABSE Conference on Innovative Wooden Structures and Bridges (Lahti, Finland), p.187-92.
C-2-5	Kawakami, M., Tokushige, H., Morohashi, T. and Wada, I. (2001): Physical Properties of Ultra-Lightweight Porous Polymer Concrete, Cement Science and Concrete Technology, No.54, p.544-9.
C-2-6	Maeda, N., Wada, I, Kawakami, M., Ueda, T. and Pushpalal, G. K. D. (2001): Development of a New Furnace for the Production of Rice Husk Ash, ACI SP-199, p.835-52.
C-2-7	Maeda, N., Wada, I., Kawakami, M., Ueda, T. and Pushpalal, G. K. D. (2001): Chloride Diffusivity of Concrete Incorporating Rice Husk Ash, ACI SP-200, p.291-308.
C-2-8	Hassan, A., Kawakami, M., Niitani, K. and Mise, A. (2001): Cracking and Ultimate Strength of Externally Prestressed Steel-free Concrete Deck Slabs, Proc. of the Japan Concrete Institute, Vol.23, No.3, p.511-6.
C-2-9	Kobayashi, M., Matsuoka, S., Era, H. and Kawakami, M. (2001): Flexural Strength of Thin-Bottom Plate Box Culvert, Proc. of the Japan Concrete Institute, Vol.23, No.3, pp.733-8
C-2-10	Kawakami, M., Tokushige, H. and Doiuchi, K. (2001): A Study on the Effect of Thickness of Polymer Mortar on the Stress and Deformation of Concrete Member Repaired by the Polymer Mortar, Proc. of the 10th Int. Cong. On Polymers in Concrete (Hawaii, U.S.A.), CD-ROM.
C-2-11	Kawakami, M., Tokushige, H., Morohashi, T. and Okamoto T. (2001): Physical and Mechanical Properties of Ultra-lightweight Polymer Concrete, Proc. of the 10th Int. Cong. on Polymers in Concrete (Hawaii, U.S.A.), CD-ROM.
C-2-12	Ono, S., Kawakami, M. and Tokushige, H. (2001): Application of Concrete-Polymer Composites to Seismic Retrofit of Concrete Structures in Japan, Proc. of the 10th Int. Cong. on Polymers in Concrete (Hawaii, U.S.A.), CD-ROM.
C-2-13	Maeda, N., Sato, K., Wada, T., Ueda, T. and Kawakami, M. (2001): Process Technology and Pozzolanic Reactivity of Rice Husk Ash, Proc. of the 2000 2nd Int. Conf. on Engineering Materials (Sanjose, U.S.A.), Vol.1, p.533-44.
C-2-14	Kawakami, M., Tokushige, H., Yamada, K. and Morohashi, T. (2001): Some Properties of Porous Polymer Concrete Using Recycled PET and Magnet Tape Aggregate, Proc. of the 2000 2nd Int. Conf. on Engineering Materials (Sanjose, U.S.A.), Vol.2, p.223-30.
C-2-15	Ghali, A., Neville, A. M. and Kawakami, M. (2001): Structural Analysis: A Unified Classical and Matrix Approach, Gihodo-shuppan, p.1-519.
C-2-16	Kagaya, M., Suzuki, T., Kokubun, S. and Tkuda, H.(2002): A Study on Mix Proportions and Properties of Steel Fiber Reinforced Roller-Compacted Concrete for Pavements, Concrete Library of JSCE, No.39, p.119-33. 
C-2-17	Sato, J. and Kagaya, M.(2002): Experimental Study on Recycling Use of Cullet as Fine Aggregate for Concrete, Proc. of JCI Symposium on Recycle Use of Waste for Concrete Making Materials, JCI-C56,p.79-84(in Japanese).
C-3-1	Heymsfield, A.J., Lewis, S., Bansemer, A., Iaquinta, J., Miloshevich, L.M., Kajikawa, M., Twohy, C. and Poellot, M. (2002): A General Approach for Deriving the Properties of Cirrus and Stratiform Ice Cloud Particles, J. Atmos. Sci., Vol. 59, No. 1, p. 3-29. 
C-3-2	Kajikawa, M., Kikuchi, K., Uyeda, H., Asuma, Y. and Sato, N. (2002): Characreristics of the Ice Pellets Observed in Mid-Winter in the Arctic Region, Polar Meteorol. Glaciol., Vol. 16, p. 75-83.
C-3-3	Matsutomi, H., N. Shuto, F. Imamura and T. Takahashi (2001): Field Survey of the 1996 Irian Jaya Earthquake Tsunami in Biak Island, Tsunamis in the Western Pacific, Kluwer Academic Publishers, Natural Hazards, Vol.24, No.3, pp.199-212. 
C-3-4	Matsutomi, H., Y. Kawata, N. Shuto, Y. Tsuji, K. Fujima, F. Imamura, M. Matsuyama, T. Takahashi, N. Maki and S. S. Han (2001): Flow Strength on Land and Damage of the 1998 Papua New Guinea Tsunami,Tsunami Research at the End of a Critical Decade,Advances in Natural and Technological Hazards Research, Vol.18, Kluwer Academic Publishers, pp.179-95. 
C-3-5	Moritoki, H., Oikawa, H. and Ogino, T. (2002): Multiplicity of deformation and shear band mode in soil, J. of applied mechanics, Vol.5, p.283-94 (in Japanese with English Abstract). 
C-3-6	Ogino, T., Oikawa, H., Tsushima, M. and Mitachi, T. (2002) : Strength characteristics of highly organic soil obtained by direct shear tests, J. of JSCE, No.715/III-60, p.277-85 (in Japanese with English Abstract). 
C-3-7	Tsushima, M., Mitachi, T. and Ogino, T. (2002) : Strength-deformation characteristics of aged and strain rate effective highly organic soil, the 47th geotech. eng. symposium, p.149-56 (in Japanese with English Abstract).

RESEARCH INSTITUTE OF MATERIALS AND RESOURCES

R-1-1	Muto, N. and Matsubaya, O. (2002): Origin and Geochemical Variation of Geothermal Water in the Tamagawa Hot Spring Area, Akita, Japan, Chikyukagaku, Vol.36, p.81-8.
R-1-2	Kano, K., Ohguchi, T., Hayashi, S., Uto, K. and Danhara, T. (2002): Toga Volcano: An Alkali-rhyolite Tuff-ring in the Western end of Oga Peninsula, NE Japan, Bull. Volc. Soc. Japan, Vol.47, No.5, p.373-96 (in Japanese).
R-1-3	Takashima, I., Tago, M. and Yamaguchi, S. (2002): Possibilities and Problems for Introduction of Low Cost Shallow Heat Extraction System by Use of Civil Engineering Machines - Case Study and Future at Ogata Test Site, Akita Prefecture, Japan-, J. Geotherm. Res. Soc. Japan, Vol.24, No.4, p.365-71 (in Japanese).   
R-1-4	Yamashita, M., Okuno, M., Takashima, I., Soejima,T., Watanabe, K., Nagaoka, S. and Fukushima, D. (2002): Thermoluminescence Age of the Aira-Iwato Tephra, Southern Kyushu, Japan: a Preliminary Report, Mem. Fac. Sci. Fukuoka Univ., Vol.32 , No.2, p.63-8 (in Japanese).
R-1-5	Nasution, A., Muraoka, H., Rani, M., Takashima, I., Takahashi, M., Akasako, H., Matsuda, K. and Badrudin, M. (2002): Geothermal Prospects of Flores Island in Indonesia Viewed from their Volcanism and Hot Water Geochemistry, Bull. Geol. Surv. Japan, Vol.53 (2/3), p.87-97.
R-1-6	Negishi, Y., Saiki, K. and Takashima, I. (2002): Detection of Topographic Caldera by using Digital Elevation Model Data, Journal of Remote Sensing Society of Japan, Vol.22, No.3, p.288-98.
R-1-7	Muraoka, H., Nasution, A., Urai, M., Takahashi, M., Takashima, I., Simanjuntak, J., Sundhoro, H., Aswin, D., Nanlohy, F., Sitorus, K., Takahashi, H. and Koseki, T. (2002): Tectonic, Volcanic and Stratigraphic Geology of the Bajawa Geothermal Field , Central Flores, Indonesia, Bull. Geol. Surv. Japan, Vol. 53 (2/3), p.109-38. 
R-1-8	Takashima, I., Nasution, A. and Muraoka, H. (2002): Thermoluminescence Dating of Volcanic and Altered Rocks in the Bajawa Geothermal Area, Central Flores Island, Indonesia, Bull. Geol. Surv. Japan, Vol.53 (2/3), p.139-46. 
R-1-9	Muraoka, H., Nasution, A., Urai, M., Takahashi, M.and Takashima, I. (2002) : Geochemistry of Volcanic Rocks in the Bajawa Geothermal Field , Central Flores , Indonesia, Bull. Geol. Surv. Japan, Vol.53 (2/3) , p.147-59.
R-1-10	Muraoka, H., Yasukawa, K., Urai, M., Takahashi, M., Nasution, A. and Takashima, I. (2002) : 2001 Fissure-Forming Eruption of Inie Lika Volcano, Central Flores, Indonesia, Bull. Geol. Surv. Japan, Vol.53 (2/3) , p.175-82.
R-1-11	Murakami, H. (2002): Mineral Chemistry and Cation Substitutions in Magnesiohornblende from the Takahinatayama Lava Dome, Onikobe Volcano, Japan, Scientific and Technical Reports of Faculty of Engineering and Resource Science, Akita University, No.23, p.87-95 (in Japanese with English Abstract).
R-1-12	Zhang, H., Magoshi, J., Magoshi, Y., Yoshida, H., Chen, J. Yu and Saiki, K. (2002): Inorganic Composition and Thermal Properties of Cocoon Fiber, Inter. J. Mater. Eng. for Resources, Vol.10, No.1, p.113-6.
R-2-1	Ohya, Y., Nakagawa, Z., Hamano, K., Kawamoto, H. and Kitaoka, S. (2001): Grain Orientation of Aluminum Titanate Ceramics during Formation Reaction, Mat. Res. Soc. Symposium Proc., Vol.658, p.GG3.17.1-5.
R-2-2	ECE, O. I. and Nakagawa, Z. (2002): Bending Strength of Porcelains, Ceramics International, Vol.28, p.131-40.
R-2-3	Sugawara, K., Enda, Y., Inoue, H., Sugawara, T. and Shirai, M. (2002): Dynamic Behavior of Trace Elements during Pyrolysis of Coals, Fuel, Vol.81, p.1439-43.
R-2-4	Muraoka, M. (2002): Sensitive Detection of Local Elasticity by Oscillating an AFM Cantilever with Its Mass Concentrated, JSME Int. J., Ser. A, Vol.45, No.4, p.567-72.
R-2-5	Muraoka, M. and Kamata H. (2002): Nanometer-resolution Mapping of Local Elasticity by a Sensitive AFM Cantilever with Its Mass Concentrated, Proc. 2nd Int. Symp. on Instrumentation Science and Technology, Jinan, China, Vol.2, p.21-4.
R-2-6	Ece, O. I., Alemdar, A., Gungor, N. and Hayashi, S. (2002): Influences of Nonionic Poly (ethylene glycol) Polymer PEG on Electrokinetic and Rheological Properties of Bentonite Suspensions, J. Appl. Poly. Sci., Vol.86, p.341-6.
R-2-7	Siriphannon, P., Kameshima, Y., Yasumori, A., Okada, K. and Hayashi, S. (2002): Comparative Study of the Formation of Hydroxyapatite in Simulated Body Fluid under Static and Flowing Systems, J. Biomed. Mater. Res., Vol.60, p.175-85.
R-2-8	Siriphannon, P., Kameshima, Y., Yasumori, A., Okada, K. and Hayashi, S. (2002): Formation of Hydroxyapatite on CaSiO3 Powders in Simulated Body Fluid, J. Eur. Ceram. Soc., Vol.22, p.511-20.
R-2-9	Hayashi, S., Furuhata, N. and Nakagawa, Z. (2002): Deposition Efficiency in the Electrophoretic Deposition of ƒ¿-Al2O3 Powder, J. Ceram. Soc. Japan, Vol.110, No.2, p.135-8.
R-2-10	Yalcin, T., Alemdar, A., ECE, O. I., Gungor, N. and Coban, F. (2002): By Particle Interactions and Rheological Properties of Bentonites + ALS Suspensions, Materials Letters, Vol.53, p.211-5.